mehasx.blogg.se - Configure zone brocade san switch

CONFIGURE ZONE BROCADE SAN SWITCH FULL
CONFIGURE ZONE BROCADE SAN SWITCH REGISTRATION
CONFIGURE ZONE BROCADE SAN SWITCH PASSWORD

You should see in the line of the port connecting the switches something like this:ģ5 35 1f2300 id 8G Online FC E-Port 10:00:00:xx:xx:xx:xx:xx "" (upstream)

Wait 10-50 seconds, then check the switch: # switchshow.

Enable the secondary switch: # switchenable.

Disable the secondary switch to make it the slave and to add the config from the primary:.

Wait 10-30 seconds before proceeding to give enough time for the link to establish and the 2 switches to talk.

Now enable the port connecting the secondary & primary switches: # portenable 35.

On the secondary switch, disable the config: # cfgdisable.

We will need them after this step: # cfgshowĬopy the output and save it in a text/word file.

First, save the current zone names of the secondary switch in a text file.

Do not connect any FC cables between the HP/IBM (different switches) until you're told to do so.

CONFIGURE ZONE BROCADE SAN SWITCH PASSWORD

Default user is 'admin' and default password is 'password'.

Changing the timezone requires a switch restart, so plan for the downtime.

Make sure switch date, timezone & time are all correct before you merge the switches.This is a very unique case, but possible if you're virtualizing the WWNs of your servers. Aliases that have the same WWN on both secondary and primary switches, must have the same name on both fabrics.If you have similar alias names on the 2 different switches, you have to rename the aliases/zones on the secondary switch (the one that you can disable to merge the fabric). Aliases and zone names must be unique before merging the fabric.If you have a lot of traffic going from one switch to another switch, it's advised to purchase the "Trunking License" to allow aggregating multiple FC ports/links together.If they are different, "Zone Conflict" error will show on the secondary switch. Switch configuration names must be the same for the fabric to merge.The 2 switches connecting to each other must have different Domain IDs. Change Domain ID from default value to a unique value.It's available by default on 48-port switches.

CONFIGURE ZONE BROCADE SAN SWITCH FULL

Full Fabric license must be available on 24-port switches.

The minor version ".x" does not have to match, but it's recommended to keep the switches on the same level, if possible.

Fabric OS has to be 6.x or 7.x on all switches connecting to each other.

Default is L0 (Normal), as per distance will display LE <=10 kms, L0. To set speed for all the ports on the switch Note – 0 :auto negotiated 1,2,4 Gbit/ sec, 1 : 1Gbit/ sec, 2 : 2 Gbit/ sec, 4 : 4Gbit/ sec To set speed for a port Note – 0 :auto negotiated 1,2,4 Gbit/ sec, 1 : 1Gbit/ sec, 2 : 2 Gbit/ sec, 4 : 4Gbit/ sec To enable a port, status would not change even after rebooting the switch To disable a port, status would not change even after rebooting the switch

CONFIGURE ZONE BROCADE SAN SWITCH REGISTRATION

High availability, heartbeat and synchronizationĪ registered state change registration is suppressed when a state change occurs on the portĪ registered state change registration is sent when a state change occurs on the port Ensure all switches in a fabric have the same parameters in order to communicateĭisplays the PID set for a switch Core, Native or Extended edgeĭisplays the current firmware version on the switchĭisplays the status of local and remote CP’s. Displays the status of the temperature readingsĭisplays the status of the sensor readingsĭisplays the information in the name server along with the state change registration detailsĭisplays detailed information of all the devices connected to all the switches in the fabric (Remote Name Servers)ĭisplays the 24 bit address of all devices that are in the fabricĭisplays all the licenses that have been added in the switchĭisplays the current date set on the switchĭisplays the banner that will appear when logging in unsing the CLI or webtoolsĭisplays the JAVA version the switch expects at the management consoleĭisplays information of all the switches in the fabricĭisplays the account information like role, description, password exp date, locked statusĭisplays the overall status of the switchĭisplays policy set for the switch regarding Marginal (Yellow) or Down (Red) error statusĭisplays the speed set for all ports on all slots and other detailed port informationĭisplays the parameters of the switch.